You are here:
Home →
Products →
Sieves and Screeners →
Eco Separator →
How it Works/Options
How it Works and Options
How the Eco Separator™ works
The Eco Separator™ is our cost effective spring mounted grading unit suitable for most wet or dry applications. This machine combines a vibratory motor with adjustable out of balance weights to allow control of product movement on the mesh, to optimize separation efficiency.
General options
To best fit into your production line and to make sure we can handle whatever throughput you require, the Eco Separator™ is available in six different sizes:
- 72" diameter
- 60" diameter
- 48" diameter
- 40" diameter
- 30" diameter
- 24” diameter
The Eco Separator™ can be fitted with up to four decks to increase separation accuracy.
Cascade System
A two-phase separation process increases mesh area significantly. The Cascade system can raise capacity by up to 70% compared to a standard separator of the same diameter.
This system is based on two screens of the same mesh size, mounted one above the other, the upper screen being slightly smaller in diameter. Material is fed to the upper screen and either passes through the mesh or flows over the edge onto the screen below to be screened again.
Other Options
- The Russell Screen Changer allows mesh screens to be changed quickly and easily without the need for manual lifting or additional tools
- ATEX Certification is available for all Eco Separators™ for use in zones 20, 21, 22, 0, 1 and 2
- The Russell Vibrasonic® Mesh Deblinding System eliminates mesh blinding down to 20 micron
- Conventional cleaning discs can also be utilized to minimize mesh screen blinding